The Bucket Shop
Facility Statistics
TECHNICAL DEPARTMENT AND SPECIALTY WORK
• Full Auto Cad and Solid Works engineering department
• CNC Computerized cutting table
• 11×30 cutting capacity (plasma arc and oxy fuel) up to 14” thick
• Ability to cut stainless and chromium carbide
• Custom design – in house engineering
HEAVY MANUFACTURING
• To customer Supplied Engineering
• P&H 1550-2000 dipper rebuild, Cat 6060.
PHYSICAL PLANT AND EQUIPMENT
• 45,000 square feet of manufacturing floor space.
• 7 Overhead Crane Aisles 3 of 71/2 ton, 1 of 20 ton.
• 18 Power Sources.
• 400 Ton Pacific Brake Press (1/2″ on 12ft).
• Complete Manifold Gas Supply System.
• 3 Portable Line Bore Units (capable of build up and material removal).
• 14 completely tooled welding field trucks ,all units have 400 amp welding machines installed, on board air supply and hydraulic hoists.
• 1-28 foot flat deck support truck with tilt & load capabilities (40,000# cap)
• Variety of fork lifts, loaders, zoom booms, scissor lifts and telehandlers.
• 1 100 Ton IRON WORKER
• Initial pinch rolls (1″ on 10ft cap).
• 6x6x1/2″ leg out rolling and 6″SCH 40 pipe rolling capabilities.
MACHINE SHOP
• 1 Lathe 18” Swing, 6 foot bed
• 1 Lathe 22” Swing, 8 foot bed
• 1 ELLIOT Drill press 3” hole capacity
• Milling Machine capabilities.
STEEL PLATE AND CASTINGS
• Heat Treated Abrasion Plate (cut to size or by sheet).
• Cut to size parts offering. Customer only pays for plate used with no inventory management concerns or costs.
• Manganese Castings.
• Master distributor of white iron products from Canadian Wear Technologies.
• Full inventory of Chromium Carbide in various thicknesses
• All plate and grades are stocked in full sheet sizes 8′x20′ and 8′x24′
• Full Inventory of all grades of plate in M/S 44w/100 400/450/500
ASSEMBLY
• Design/build new buckets to customer specifications
• Fabricate new buckets to OEM Specifications
• Restoration of Old Buckets back to OEM and better specifications.
BUCKET INVENTORY – OVER 120 UNITS IN STOCK
• Atlas Copco, Jarvis Clark, Hitachi, MTI, Cat, Daewoo, JCI.
• As Well as all custom built units by others.
TESTING AND STANDARDS
• The Bucket Shop is CWB approved to CSA Standard W47.1 (Certification of Companies for Fusion Welding of Steel Structures) in Division 2.1 w57.
Source: http://www.bucketshop.on.ca/bucketshop/index.php/facility-statistics
Work with Us
We are always looking for talented trades people. Whether you are entry level or an experienced trades person, we may have a spot for you on our team.