TS Manufacturing
Biomass and Pelletization
EQUIPMENT
EQUIPMENT TO FILL THE NEEDS FOR PELLETIZERS AND BRIQUETTERS OF ALL SIZES
TS Manufacturing has been a World Leader in wood handling and processing for over 40 years. Our expertise in Log, Chip, Sawdust and Package handling is unmatched worldwide. When it comes to Pelletization and Briquetting, you want to ensure that your plant is providing the highest quality product, with the lowest cost of output. Contact us now to see how our in-house Engineering, Manufacturing or Installation Teams can ensure you a successful project.
We design and manufacture:
• Log and Roundwood Handling Systems
• Chip and Sawdust Conveying Systems
• Wood Meal Breakdown Systems
• Chip and Sawdust Storage Bins • Pellet Cooling & Storage Silos
• Dryer & Burner Feed Handling
• Chip Blending Systems
BOILER FEED SYSTEMS
TS Manufacturing has been providing custom Boiler Feed Systems for over 40 years. Our knowledge & experience in large and small systems allows us to design and build the right solution for you. Whether you need a Reclaim & Silo Solution, Stoker Floor Pile Reclaim, or a Travelling Screw Reclaim System, we have the experience and facilities to design exactly what your system requires.
BIOMASS BULK MATERIAL HANDLING SYSTEMS
Below is a selection of Bulk Material Systems we manufacture:
- Truss Conveyors
- Belt Conveying
- TS Vibrating Conveyors
- TS Gallery Conveyors
CHALLENGE HIGHLIGHT - WOOD INPUT REQUIREMENTS
Many pellet mills and briquette mills have been built using 'Sawmill Residue'. The current depression in the lumber markets (both softwood and hardwood) have caused many pellet mills to encounter a shortage in mill residues that can affect their ability to provide for their existing customers. Alternatively, some of our customers are finding that they now need to be ready to 'blend' mixtures of species in their pellets that they were not required to previously. All of this is due to a rise in pelletizing and briquetting while the traditional residue sources are experiencing a sharp decline. TS Manufacturing can help.
The Magic is in the Details
We manufacture the components of 'Turnkey' wood feed systems. Whether you require a Truck Dumper System, a Pulp Wood Debarking and Chipping System, or are just looking for a better way to store and mix your incoming wood meals, we can help. TS can assist you in selecting the right Infeed System for your plant, whether that's a Truck Dumper, a Walking Floor, a Stoker Floor Reclaimer, a Chain Reclaim System (or a combination of these), we have the knowledge, background, experience and machinery to guarantee you a rugged and efficient system.
Biomass Combustion Systems (BCS) Boilers
BCS fully automated wood fired boilers produce steam and hot water from 100 to 600 HP. BCS designs, constructs and installs systems which incorporate our unique Horizontal Zoned Grate Combustion System. BCS Boiler projects range from do-it-yourself retrofit kits to turnkey cogeneration packages.
TS Manufacturing recommends BCS Boilers for projects that require clean combustion technology of waste and low grade wood. biomasscombustion.com
Balancing Diversity with Expertise
For over 40 years we have continually broadened our experience and knowledge in the biomass industry. Our manufacturing experience outside of biomass, gives TS superior insight into customized equipment concepts.
Our accomplished Engineers use their extensive experience to design custom systems that always exceed delivery expectations. This is really what TS has been building for over 40 years – client satisfaction and trust.
CLIENTS
A BRIEF EXCERPT OF OUR CLIENT LIST FOR BIOMASS EQUIPMENT
Abitibi Paper
Bradford Forest Products
Chapleau Cogeneration
Clarion Board
Columbia Forest Products
Domtar
Epcor Calstock Power
Fraser Paper
GP Flakeboard
Grant OSB Plant
Northland Power Corp.
Pallet One
Planchers Mercier
Potomac Supply
Pride Manufacturing
Rayonier
St. Mary's Pulp & Paper
Weaber Lumber Inc.
Source: http://www.tsman.com/bio/tsmfg-bio.htm
CNC Machinist / Programmer
Working in a fast paced environment you will be responsible for programming, set up and operation of our state of the art, multi-axis (four) CNC Vertical Mills and Lathes with Live Tooling, to create custom parts for our specialized equipment.
Electrical System Designer / PLC Programmer
The successful candidate will possess strong electrical design skills, coupled with good mechanical understanding, to work in our engineering design office in Lindsay, Ontario.
Mechanical Designer
The successful candidate will possess strong general mechanical skills to work in our design office in Lindsay, Ontario.
Software Developer
This person will work alongside Senior Programmers to maintain and modify custom enterprise applications, with the possibility of developing new software solutions.
Accounting Clerk
Working in a manufacturing environment the accounting clerk will primarily perform Accounts Receivable functions, however, will be required to assist with Accounts Payable and Payroll as needed.
Welder / Fitter
The successful candidate will have:
- A minimum of 3 years experience in Metal Fabrication
- The ability to read and properly interpret mechanical drawings