AFM Industries
Base Belts
|
Base belts, sidewalls & cleats can be manufactured using a rubber grade specific to your application requirements. These cover grades include (but are not limited to) high abrasion resistant, oil resistant, flame resistant (MSHA, CSA-C, etc.), heat
resistant, and chemical resistant. Our technical staff will assist you in selecting the correct grade to suit your needs.
Type Xe
Used primarily in light to medium duty applications, the cross-stabilization is incorporated into the tensioning ply.
Type Xe-ep
Used in medium to heavy applications, the cross-stabilization ply is separate from the tensioning plies. In the example shown the belt has 2 crossstabilising plies.
Type Xe-SC
Used where transverse rigidity is critical, this belt incorporates textile tensioning plies with steel cable crossstabilizing layers.
Type XST-SC
Used on high vertical lift applications, this belt combines steel cable tensioning with steel cable crossstabilizing members.