Home > Suppliers Companies > Aquatech > Products > > Our Products > HL6M Dri-Prime Pumps
Aquatech

HL6M Dri-Prime Pumps

The Godwin Dri-Prime 8" x 6" (200mm x 150mm) HL6M automatic priming centrifugal pump is a high pressure discharge pump with maximum flows of 2300 gallons per minute (145 l/sec.) and discharge heads to 320 feet (97.5M) or 135 psi (9.3 BAR). At home in a wide variety of applications, the HL6M has been used in temporary fire service, quarry and mine dewatering, and as a temporary replacement for permanently installed transfer pumps. Like all Godwin Dri-Prime pumps, the HL6M can prime and reprime automatically from dry to 28 feet (8.5M) of suction lift.

HL6M

Technology Data

Weight 7,000 lbs. (2,175 kg.)
Dimensions HL6M — Caterpillar 3126, Skid Base

 

Open full description in this PDF.  

Features


• Fully automatic priming from dry to 28 feet (8.5M) of suction lift. Maximum heads to 320 feet (97.5M), maximum flows to 2300 gpm (145 l/sec.).

• Pumpend available in cast iron, stainless steel and other hardened materials.

• Extensive application flexibility — will handle sludges and liquids with solids up to 1-1/2" (38mm) in diameter.

• Continuously operated “Godwin” venturi air ejector priming device featuring belt driven air compressor requiring no form of periodic adjustment or control.

• Solids handling flapper-type Non Return Valve with renewable flexible rubber seat.

• Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.

• Compact unit mounted on a heavyduty skid base or two-wheeled highway trailer both incorporating integral overnight running fuel tank and lifting frame.

• Simple maintenance — normally limited to checking engine and seal cavity oil levels.

• Standard engine — Caterpillar 3126. Available with a variety of engines including John Deere, Cummins and Deutz. Electric motor driven units are also available.

• A variety of silenced units are available