H2O Control Products Inc.
Purifiner Water Analysis Service
Why Have Your Water Analyzed?
Your water may be causing problems in your home even though there are no detectable signs. Scaling on internal components of water heaters and other expensive appliances may be costing you your hard earned money.
From Our Laboratory You Get:
• 17 Parameter Report
• Recommendations (contingent on supplied information)
• Rapid Turnaround (3 working days average)
• Low cost
The report will typically look like the following example: s
How To Get It Done
• Sample your water as per the sampling guide in this link. Please see Acceptable Sampling Containers below.
• Send it to you closest Purifiner retailer or directly to us , freight prepaid.
Acceptable Sampling Containers
Bottles must be between 500ml and 1000ml in volume
Bottles that are deemed acceptable
Container Description
1. Polyethylene (PE) 500ml
2. Polycarbonate (PTE) 500ml
3. Polyethylene (PE) 250ml (2 would be required per sample)
4. Polyethylene (PE) for Microbiological Testing Bottle DO NOT USE THIS TYPE
Please do not use containers that have contained food or beverage products such as fruit juices and soda pop. The odorants and preservatives may interfere with analysis results.
Containers with volumes exceeding 1000ml may be rejected or processed with a oversized filtering charge applied unless prior arrangments have been made
Source: http://sudbury.purifiner.com/site/water_analysis
|