Superior
12-36 Line Boring Machine
|
The SPR York 12-36 line boring machine can be set up several ways depending on the work area. Tack weld plates are provided, but in some cases, you may want to pick up an existing bolt pattern on the work piece. If so, a special set up fixture would be required and can be manufactured by SPR York Portable Machine Tools.
The SPR York 12-36 line boring machine can be set up several ways depending on the work area. Tack weld plates are provided, but in some cases, you may want to pick up an existing bolt pattern on the work piece. If so, a special set up fixture would be required and can be manufactured by SPR York Portable Machine Tools.
Using the bar length chart select the correct length boring bar for the job.
Attach the three leg mounting fixture to the work piece
Mount the bearings on each end and bolt them to the bearing plates
Insert the boring bar
Mount the two halves of the head to the boring bar. Tool head extensions may be required for larger bores. Extensions are provided in the kit
Center the bar by sweeping the bore. Adjust the bar alignment with the jacking screws on the jacking plate. When the bar is aligned tighten the bearing to the jacking plate to prevent further movement.
Attach the feed motor to either end of the boring bar and connect the hydraulic bar drive.
Advantages
Boring diameters from 8-36”
Twin lead screws for balanced feeding
Variable and reversible feed rates
Variable and reversible rotation speeds
X/Y adjustable bearing mounts