DURMA DCB-S 360
|
Standard Equipment:
• Two-way 45° Angle Adjustable Clamp
• Hydraulic Vice
• Electronic Variable Cutting Speed Adjustment with Inverter
• Bimetal Bandsaw and Cooling System
• Blade Tensioning – Hydro Mechanical
• Bearing and Carbide Tape Blade Housing
• Cutting Height Adjustment
• Motorized Roller Feeding
• Top Clamping – Mechanical
• Blade Tensioning
• Length Adjustment – Mechanical
• Chip Brush
• Part Counter
• 47” Roller Table
• Turning Table
DCB-S 360 Specs:
Capacity:
• 90°
• Round = Ø14 in – 360mm
• Square = 14 in – 360mm
• Rectangular = 20 x 14 in – 500mm x 360mm
• 60°
• Round = Ø14 in – 350mm /280mm
• Square = 14 in – 350mm /280mm
• Rectangular = 14 x 14 in – 350mm x 360mm
• 45°
• Round = Ø7 3/4 in – 200mm
• Square = 7 3/4 in – 200mm
• Rectangular = 7 3/4 x 14 in – 200mm x 360mm
Motor:
• Main Motor = 3 HP 220/460, 3 Phase
• Hydraulic Pump Motor = ¾ HP
• Material Feed Motor = Optional
• Cooling Motor = 0.125 HP
Other Info:
• Dimensions = 97” x 49” x 67” (2480 x 1250 x 1715)
• Cutting Speed = 794 ~ 3573 (inches per minute)
• Working Height = 25 in
• Weight: 3850 Lbs