D9 Apron Plate Feeder
Predominantly used in high volume surface applications the MMD D9 Apron Plate Feeder has been designed to accept exceptionally high impact forces in the loading area to allow large run-of-mine material to be directly dumped on to the plates whilst the unit is still running. Although it is one of the largest and heaviest feeders we manufacture, the D9 feeder has been utilised in high capacity mobile applications where capacities of over 10,000TPH of ROM material has been achieved.
Standard Features
This facility, incorporated into all the MMD Feeders allows loading of material directly onto the feeder plates even whilst operational. |
|
The torque transmitted by the sprockets provides adequate drive to start the feeder with a full load of material. |
|
The apron plates, made from rolled sections provide an impact resistant surface for material to be loaded on to. |
|
Heavy Duty sealed and lubricated chains and rollers ensure smooth travel of the deck during operation. |
|
The head and tail shafts are manufactured from high strength steel to transmit the high torque loads required to pull out from a fully laden start up. |
|
With a strong lightweight open construction the mainframe provides easy inspection and minimises supporting steelwork for easy site installation and maintenance. |
|
A variable speed hydraulic / electro-mechanical drive is fitted to provide a simple method of controlling throughput. |
Optional Features
In-Built Fines Retrieval System Fine material from underneath the feeder is brought back to the top of the feeder to be deposited with the rest of the material. |